It’s understandable why people would like to install a fence around their property for privacy. It’s not really comfortable to be always visible from the road, with passers-by looking at everything you’re doing from inside your home. 

Privacy fences are quite popular in many neighborhoods. However, there’s a right and wrong way to install them, so be sure to consult with local fencing contractors who are well-versed with the city codes when it comes to installing fences.  

In case you want to install privacy fences yourself, here are some of the steps that you have to follow. Take note that most privacy fences are made of wood, so you’ve got to make sure that this material is usable on your property. 

1. Determine the locations of the end and corner posts.  

Fences need end and corner posts for strength and stability. You have to mark where these areas will be using rebar or flag. That way, you will be able to adjust their locations as needed. It’s quite easy to install privacy fences on leveled surfaces. If your property has a slope or grade, then you might need to make minor adjustments along the way.  

2. Dig a hole.  

The depth required for each hole is 24 inches. Make sure that the diameter of the hole is thrice as large as the width of the post. However, you might need to dig deeper if you are located in an area where there is high winds or vibration. On the other hand, if the soil is too soft, you might need to add concrete to the footer for added support. 

3. Install the post.  

Once you have the post ready, install and secure it in place. You may pack back the dirt, but it’s better to use gravel or concrete mix for stability. Gravel doesn’t require curing and it’s easier for you to take out the post if it’s necessary.  

4. String lines between the posts.  

Now that you have the corner posts up, it’s time to install the individual fences. String a line from one post to the other so you’ll know where the fence should fall. Dig holes along that line, fitting each fence panel.  

5. Install the panels.  

If you have used concrete to secure the posts, wait for it to fully cure before you install the rest of the panels. When ready, start installing panels from the corner posts. Screw them into the posts and place the spacers under the panels to hold them in place. Do this for every panel around your property and you’re all set.  

It’s fairly easy to install a wood fence on your own. However, it is still better if you seek the help of professionals. Expert fence installers will make sure that your fence is installed properly. If you hire them to do the job, then you won’t have to worry about doing manual labor. You can simply wait for them to finish the project while you sit back and relax in your more private and more secure home.